Krick MAX3660 1900Kv InRunner brushless motor

InRunner MAX3660 1900Kv brushless motor

Krick 42411

MAX Runner 3660 1900 KV internal-rotor BL motor.

The brushless motors in the MAX Runner series are suitable for use as a drive for model ships. These internal rotor motors are high-speed and suitable for use in racing boats or as a motor for sports boats and yachts.

They are mounted with two screws and are no different from conventional motors. The fastening screws must not touch the windings in the motor in order to prevent damage. The screws must not protrude more than 8 mm into the housing. The temperature of the motor must not exceed 60° C during operation. Reduce the operating voltage or the diameter/pitch of the propeller to lower the temperature. However, the maximum operating voltage must not be exceeded. The maximum power specified in the technical data may only be required in short-term operation (< 5 min).

The installation of water cooling is recommended. The Krick water cooling coil item no. 42122 and hose item no. 70917 are used for this purpose.
 

Technical data

• Motor type MAX Runner 3660 BL
• Voltage range 6 - 26 V
• Number of poles: 4
• Internal resistance 60 mOhm
• Max. power Power rating 1200 W
• Max. power Current 46 A
• KV (Speed/volt) 1900 rpm
• Housing dimensions Ø 36 x 60 mm
• Mounting hole spacing 25 mm
• Fastening thread M3
• Motor shaft Ø 5 x 14.5 mm
• Connector GK 4 mm
• Weight 220 g

Recommended controller : Seaking 60 (up to a battery voltage of 11.1 V) or for higher voltages : Seaking 120 to Seaking 180

Successor to brushless motor Roxxy Innrunner 3645/06 1800 KV Ref. moro4786