Aqua-Race Classic outboard engine

Aqua-Race Classic outboard engine

Aeronaut 700502

Outboard engine in the style of the 30s to 50s for classic boats like the Spitfire in other models up to about 80cm long.
The assembly is fixed on the reverse panel of the boat by four screws and allows an adjustment of 7mm in height; the thrust angle can be adjusted by +/-5°.
The electric motor is installed in a visible position, at the front of the tank, the transmission is through a flexible shaft.

The assembly does not include the engine or propeller but includes an adapter for shafts Ø3.17 / Ø4mm.

• Maximum rotational speed: 26000 rpm
• Width: 54 mm
• Height: 157 mm
• Engine mounting innards: 16mm and 19mm
• Flexible drive under teflon sheath.
• Fixing the propeller by thread M4
• Direction of rotation of the propeller in forward motion: countert clockwise
• Max propeller diameter: Ø39mm

The marking on the tank may vary according to the arrivals.

Some photos show the outboard motor equipped with a brushless motor as an example (engine not delivered)

Important Note!

The shaft must be greased before startup! Do not operate the motor dry.

For operation, the motor must always be submerged in water, or the flexible shaft must be lubricated at the sintered bearing mounting point before operation. Operating the motor dry can damage the bearing.