2 in 1 Fusion SE 1800kv Quicrun Brushless motor/controller by HobbyWing

2 in 1 Fusion SE 1800kv Quicrun Brushless motor/controller by HobbyWing

HobbyWing 30404317

Aesthetically appealing
The Fusion SE offers a 2-in-1 design that saves space and simplifies wiring layout in the model. With a length of 58mm, the Fusion SE has been slightly shortened to enable it to fit into a greater number of models.

FOC Powered
FOC electric management has changed the game in the cross-country vehicle segment. The system's extreme efficiency means lower temperatures and longer running times. Virtually silent operation delivers astonishing power and response at all speeds, while allowing extremely low rpm control.
Compared with conventional brushless sensored systems, FOC systems offer a dramatic increase in response and power delivery.

Intelligent torque management
Intelligent torque and speed management enable you to take full advantage of cruise control and the slow descent function on steep inclines, making control more comfortable.

Adaptive adjustment of engine braking force, providing high parking capacity on slopes.

Handling
With 8 levels of engine brake force adjustment and 9 application speeds, drivers can fine-tune downhill holding power and overall vehicle behavior. Overall, the braking force can be up to 2 times greater than with conventional brushless configurations.

Designed to last
Silicone gaskets, high-quality electronic buttons and components guarantee the long life of the Fusion SE. Designed to withstand extreme abuse and operating conditions from all types of users.

Multiple protection functions
Protection against low battery voltage, protection against overheating, protection against loss of gas signal, protection against jamming.

Ready for all operating conditions
The IP67 waterproof rating ensures that the Fusion SE is protected against water, dust and just about anything else that can happen to it. Designed to withstand all conditions, again and again.

Note: the above IP67 protection level is splash proof, waterproof and dustproof under normal conditions of use, and is tested under controlled laboratory conditions. Its effect complies with GB / T 4208-2017 (national) / IEC 60529 (overseas) for IP67 level. Resistance to splashes, water and dust is not permanent and the level of protection may decrease over time. To avoid damage, do not leave the device submerged for long periods.

Programming
It supports the LED program box for setting controller parameters, and has an independent setting interface integrated into the power switch, making controller configuration more convenient.

Features :

• Continuous current: 40A
• Battery voltage: 2-3S Lipo (7.4V - 11.1V) or 6-9 NiMH cells (7.2V - 10.8V)
• BEC output: 6V/7.4V adjustable, 4A continuous
• Dimensions: Ø36x58.1mm
• Weight: 201g (including wires and connectors)
• Programming port: independent programming interface
• Motor KV: 1800KV
• Shaft diameter and length: Ø3.175x16.5mm
• Number of motor poles: 4