Smoke generator module for RC models
Smoke generator module for RC models - This smoke generator can be controlled by your engine controller and can be installed on any type of model: boat, truck, construction machine...
100% Secure CB Payment
100% secure CB payment. Payments in 2x, 3x or 4x.
Fast deliveries
Shipment within 24 hours (in working days)
AQ09
Smoke generator module for RC models
Smoke generator module for RC models, to liven up all your radio-controlled models.
Easy to install and use.
The smoke generator is supplied with two threaded spacers and the M3 screws required for installation.
The T-Dean power interface (red plug) is designed to be connected to a battery (voltage between 7.2V and 12V) on the input side, with the option of connecting a ESC or brushless controller on the output side.
The servo-type connector (black plug) can be connected in parallel with the receiver's motor channel, using a Y-cord (Y-cord not included).
Delivery: 1 smoke generator + 1 pump + 1 electronic board (pump and generator control) + two threaded spacers with M3 screws + silicone hose
Features :
- Overall dimensions
- Smoke box: 28x40x38mm
- Pump: Ø27x68mm
- Electronic board: 46x22x8mm
- Power supply: 7.2V to 12V
- Battery connector: T-Dean plug
- Battery input: T-Dean male
- Output to ESC/controller: T-Dean female
- Receiver connector: Universal socket type Graupner/JR
- Smoke fluid tank capacity: approximately 5 to 6 ml
Recommended accessories:
| Manufacturer | Tecnimodel |
|---|---|
| Voltage (V) | 7.2 V - 12 V |
| Connector | T-Dean |
