HOBBYWING Quicrun WP 1080 G2 WaterProof Brushed Crawler ESC

HOBBYWING Quicrun WP 1080 G2 WaterProof Brushed Crawler ESC

HOBBYWING 30120202

The HobbyWing Quicrun WP 1080 G2 ESC offers, compared to its predecessor, 4 operating modes including the new "Car Mode", a much better heat dissipation and an improved BEC.

With the "Car Mode" you can adjust in real time the braking force and switch the motor direction thanks to auxiliary channels. So users can adjust braking force on the fly, without having to connect the programming card. This requires available channels on your receiver.

The new design improves and reduces the operating temperatures of the ESC Quicrun WP1080 by around 15 degrees, increasing its reliability. The ESC can also be fitted with a fan to meet additional cooling requirements.

Compared to the WP1080 model, the Quicrun WP1080 G2 controller offers a nozzle of up to 8.4V at 6A. 15 adjustable parameters and over 90 values also ensure that the controller can be completely tailored to your own requirements.

Features:

• Electronic Speed Controller (ESC) for brushed electric motors

• Fully waterproof design for all conditions (IP67). (Note: please clean and dry after use to prevent connectors from rusting).

• HOBBYWING's patented copper thermally conductive plates attached to the MOSFET board allow internal heat to be rapidly transferred to the CNC-machined aluminum reticular heatsink for high heat dissipation.

• The highly reliable electronic switch design prevents mechanical switch failure due to dirt, water, dust, etc.

• Adjustable drag brake and drag brake rate for different vehicles, tracks and control sensations. Adjustable PWM frequency combined with advanced freewheel technology (/DEO) guarantees high gas pedal linearity and good driving sensations.

• The innovative "real car" mode makes control of the vehicle's descent more stable and brings a new level of driving pleasure.

• It is possible to use the transmitter (AUX channel) to adjust braking force in real time, and to change braking force at any time and anywhere according to demand.

• Multiple protections: power failure protection, thermal protection and protection against loss of throttle signal.

• Separate programming port for easy connection of the LED programming card to the ESC.

• One-button ESC programming and factory reset.

• ESC programming via Hobbywing LED programming card (sold separately, see recommended accessories).

Technical specifications:

• Continuous current: 80 A
• Peak current: 400 A
• Motor type: brush motor
• Motor class: 540 / 550 class
• Lipo / NiMH cells: 2-3S Lipo / 5-9S NiMh
• BEC output: 6V / 7.4V / 8.4V @ 4A
• Battery connector: XT60
• Motor connector: Ø4mm round plugs
• Dimensions: 37.2 x 31.9 x 18.4 mm
• Weight: 70.2 g (with wires and connectors)
• Programming port: Separate port