Servonaut M24 Electronic Speed Controller and light module

Servonaut M24 Electronic Speed Controller and light module.

For radiocontrolled trucks.

ESC and light module, with speed controller, for radio-controlled trucks.

This is a development of the M20+ ESC with 4 A lights output and disengageable cruise control.

Improved lighting system, with Xenon effect, bulb effect and MultiBus compatibility

Compatible with standard motors and Coreless motors ( not to be confused with brushless motors, the M24 does not work with brushless motors)

Light module with 6 outputs:

• Reversing lights
• Brake lights
• Right and left turn signals
• Parking lights
• Low beam

Output for fifth wheel servo
Output for sound modul

The ESC comes with a standard configuration. Advanced settings can be made using the Servonaut CARD (not included, available as an accessory) or the HS-12 radio

Settings via Servonaut CARD include:

• Cruise control on/off
• Kombi mode
• Bulb lighting effect
• Xenon effect
• Reverse warning activation
• Acceleration
• Braking power
• 32Khz frequency for coreless motors

Multibus compatibility: lighting functions can be controlled by a Graupner "Nautic" module or a Robbe "Multi-switch" 8413 module or similar.

• Supply voltage:
• 7.2 or 12V Nimh, 2s or 3s Lipo
• No-load consumption: 40mA
• Operating frequency: 16Khz or 32Khz
• BEC: 5.3v max. 4A
• Max. current: 20A
• Max. current per lighting output: 700mA
• Number of radio control channels required: 2
• Protection: overcurrent, temperature, undervoltage
• Dimensions: 80 x 43 x 13 mm
• Powerful electromagnetic brake
• Regenerative braking: energy recovered during braking recharges the battery.

Manual and wiring diagram in German, English and French (translation in French by Tecnimodel).

Settings available with Servonaut CARD ( Servonaut CARD sold separately)

• Combi effect (the combi effect lets you combine front pilot lights with fog lights, and rear lights with stop lights) This value adjusts the light output of the front and rear lights. Fog lamps and brake lights are always illuminated at full power with the M24.
• Incandescent bulb effect. Unlike incandescent bulbs, LEDs light up instantly. To simulate incandescent lighting, you can adjust the intensity of the phenomenon.
• Xenon effect
• Turn signal intensity
• Position light intensity
• Speed limiter
• Neutral mode.
• Starting aid
• Acceleration
• Braking
• Man / Auto turn signals
• Cruise control On/Off