FLYSKY FTr10 AFHDS3 10-channel receiver

FLYSKY FTr10 10-channel AFHDS3 receiver

FLYSKY FTr10 10-channel receiver in AFHDS3, for radios using the AFHDS3 communication protocol ( e.g. Paladin radios ).

Features:

• Product model : FTr1
• PWM channel: 10
• Wireless frequency: 2.4GHz
• Communication protocol: AFHDS3
• Range: > 3500m (air)
• Antenna type: dual antenna (103mm * 2)
• Supply voltage: 3.5v - 12v
• RSSI: supported
• Data port : PWM / PPM / i.bus / s.bus / UART
• Temperature range: -10 ℃ - + 60 ℃
• Humidity range: 20% - 95
• Online update: Yes
• Dimensions: 52 * 28 * 22mm
• Weight: 22g
• Certification: CE, RCM, FCC ID: N4ZFTR1000

Pairing procedure:

• Insert the link cable into the "BIND" port on the receiver.
• Plug the power cable into any other port. The receiver's LED starts flashing rapidly, indicating that it has switched to bind mode.
• Switch the transmitter to bind mode (see transmitter instruction manual for details).
• The connection is successful when the receiver LED stops flashing. Remove the power and bind cables from the receiver.
• Reconnect the power cable to the receiver.
• Check that the transmitter and receiver work as expected; if there are any problems or unexpected operation, follow the steps above to reconnect.