Hydraulic system for lifting a bucket with a 208mm telescopic cylinder

LESU Y-1551-208

Content:

• Telescopic cylinder simple effect of 208mm long completely extended.
• Hydraulic pump with brushless motor
• brushless controller for pump motor
• Oil tank
• 2 tank mounts
• Hydraulic hose Ø4mm
• Instructions in French.

Oil not included (see "accessories" on this page).

Technical information:

Power supply: Lipo or Nimh battery, 7.2v to 12v

Connectors: T dean type socket for the battery

Socket servo standard TYPE UNI (Graupner/JR) for the receiver.

Preferably, the pump control channel should be controlled using a potentiometer to be able to adjust the pump speed. DO NOT control the pump using an all-or-nothing control (switch). Imperatively control the pump using a proportional control. The radio shall preferably include a travel adjustment to limit the operating speed of the pump.

Dimensions of the tank:

Length= 85mm

Width = 52mm

Height = 52mm

Dimensions of the cylinder:

Body diameter: 34mm

Retracted length (distance) : 55mm

Retracted total length: 70mm

Dimensions of the hydraulic pump:

Length: approximately 80mm

Width x height: 35mm x 35mm