2 x 4-port switch

This module allows you to switch 4 channels to 4 servos or 4 others.
Operation:
The module connects to the 4 channels of the receivers that it is necessary to switch.
8 servos (or other devices such as drives) are connected to the module outputs.
When the module is at rest, the first 4 outputs are active (so the first 4 servos are controlled). When the module is activated, it is the other 4 outputs that are active (so the other 4 servos that are controlled).
The activation of the module is controlled by a switch type CTI PS4.

It is thus possible to increase the number of functions possible on a model:


For example a crane truck will need 4 lanes for conventional truck controls and 4 lanes to control the crane. We will use the 4 main channels (controlled by the sleeves of the radio): these 4 ports will be connected to the port switch module. A fifth port will control the control module.
The first outputs will be used to control the functions of the truck: engine, gearbox, steering, lights.
When the module is activated, these functions will no longer be controlled and the tracks will control the movements of the crane.

No modification required on the radio controller.
No separate power supply.
Dimensions 33*15*5 mm