PS4bU switch module flashing "Us style"

CTI PS4bU

Switching module for 4 on/off lighting functions, 2 of which function as turn signals
(with "US style" turn signals)

Switching module for 4 on / off functions including 2 operating as a "US style" turn signal (flashing lights and coupled night lights).
When exit A1 is active, exits B1 and B2 are also active.


The four outputs are ordered as follows:
Sleeve briefly on the left: exit B1clignotant = on / off
Handle briefly on the right: blinking B2 exit = on / off
Sleeve long left: exit A1 = on / off
Channel long on the right: exit A2 = on / off
(Briefly = less than 1 second)

You can also put on both turn signals at the same time and therefore also get a danger warning ("Warning").
In the transmitter, no changes are necessary!

Data sheet
MOSFET transistors are designed for direct currents of up to 4 amps. However, they accept short-lived peak currents of up to 26 amps.
Maximum voltage: 20 volts. Internal resistance: 29 milliohms.
This means that with a current of 4 amps, the heat loss of about half a Watt!

Note:
During radio interference or a fault in the module, it can happen that an output is unintentionally running!


Connection: Connect the "plus" of the led to the "plus" of the battery, and its "minus" to the blue wire of the PS4.

Notice in French.