Mini light source module ML4

ML4 Servonaut

The ML4 mini light source module provides 4 outputs for the control of turn signals, hazard warning lights, position lights and main-beam headlamps. It is the ideal module in addition to a Servonaut drive that already includes stop lamps and reversing lamps such as the M24, T20, S20 and / or M212T. It can also be used with the special M220 drive.
The ML4 offers the lighting functions equivalent to the M24 drive (The stop and reversing lamps being provided by the inverter).
The turn signals are controlled manually (are not coupled to the steering) which allows a more realistic operation. By setting the module using a jumper, it is possible to configure the lighting with a Xenon effect.

Notice and wiring diagram in French (translation by TECNIMODEL).

Delivered alone, without cables, bulbs or leds.

Available outputs:

• Straight turn signal
• Left turn signal
• Fire 1
• Fire 2

The module also allows you to have the warnings. The light outputs 1 and 2 allow to control two sets of different lights at the choice of the installer (for example night light and codes, or codes and headlights).

Warning: the installation of LEDs involves the use of resistors!

Characteristics:

• Operating voltage: 4.8v to 18v
• Receiver voltage: 4.8 to 6v
• Features:
  • Flashing lights and hazard warning lights
  • Position (side) lamps
  • Main-beam headlamps
• 4 outputs of 700 mA each
• Empty consumption: 22mA under 6v
• Proportional or inter 3-position control
• Receiver connection type: standard plug type JR
• For positive impulse systems
• Pulse type: 1 to 2ms from 40 to 60 Hz
• Temperature range: 0 to 40 °c
• Dimensions: 45x22x12 mm
• Connector to receiver: UNI (universal) type / Graupner / JR
• Power connector: male spout type

Required material not included (available separately, see "accessories")

• Battery connection cord