MI-8 MICRO METAL FOIL ADHESIVE from MICROSCALE

MICRO METAL FOIL ADHESIVE

Glue for metal sheets

Vial of 29.5 ml (1 fl. oz.)


It is true that nothing looks more like metal than Sheave metal. MICRO METAL FOIL ADHESIVE is the easiest and most economical way to apply Sheave metal sheets to your models.
The instructions for use are simple: you must first get a flat and soft brush that does not lose its hair. A synthetic model is the most appropriate. Then you need a place free of dust that could lodge on the metal sheet. Apply the thinner possible layer of METAL FOIL ADHESIVE on the back of the metal sheet. Allow to dry for 15 minutes until the glue is transparent but not milky. Try to avoid any deposit of dust during drying. Rub the surface of the model with a soft cloth. Place the sheet of metal with the sticky side towards the model where you want to apply the metal. Try as much as possible to stick it flat to avoid air bubbles. Then press the sheet against the template to ensure pasting. You have to start in the center and end at the ends. Then you only have to put the sheet to the right size with a scalpel equipped with a new and very thin blade.