Varnish G4 primary hanging Yachtcare 1L

Pot of 1 liter.

soloplast's Yachtcare product range is specially designed for boat maintenance and repair. The use of these products is also adapted to the realization of our models when high quality and high strength are sought.

Excellent wood protection and preparation product used in hanging primer for wood, concrete, polyester

• Protects wood from moisture
• 1L pot
• Use protective equipment (mask, gloves, goggles)

Wood varnish particularly resistant to wear. The pores are clogged and the wood is thus optimally protected against moisture infiltration. This varnish of a slightly brownish color will give the light woods a yellowish tint.

YC PRIMARY HOOKING G4 turns slightly yellow under the influence of UV rays.

G4: Primary wood G4 is a ready-made polyurethane protection for application in the maritime field, which hardens with air humidity.

For dilution, use the "Polyurethane thinner for varnish G4 and G8 YachtCare"

Vitrification of wood: From its slightly amber color, the G4 is especially recommended as a wear-resistant varnish (solid) for dark woods. Light woods will have an amber tint. Carefully sand the old coats of paint.

On highly porous woods, anchoring and flow will be improved by adding 200% of "Polyurethane thinner for varnish G4 and G8 YachtCare" in the first layer, then 100% in the second. Add at least 2 additional undiluted layers.

In more conventional cases, the G4 can be used diluted to 20% and then 10% or not at all.

Hanging primer for epoxy coating and polyester / laminates. G4 hangs polyester and epoxy coatings on wood and metal. Clean the media. Apply the G4 with a brush, roller or gun (use a mask).

Consumption : 0,25 l/m²

After 30 minutes (maximum 4 hours), cover the treated parts with polyester or epoxy resin.

The amber coloration becomes darker under the actions of UV.