Electronic Speed Controller THOR22LF-BR by CTI
CTI THOR22LF-BR ESC. Electronic speed controller with forward and reverse and connections for brake and reverse lights.
100% Secure CB Payment
100% secure CB payment. Payments in 2x, 3x or 4x.
Fast deliveries
Shipment within 24 hours (in working days)
Electronic Speed Controller THOR22LF-BR by CTI
Electronic variable speed drive with forward and reverse gear and connections for brake and reversing lights.
For the first time, these THOR controllers are equipped with outputs for connecting reversing and brake lights (each up to 2A, negative switching).
The integrated switch-mode BEC power supply can deliver up to 3 amps peak current at 5 volts (2A continuous).
Specifications :
- Functions: Forward / Reverse
- Operating voltage: 6 to 24 volts (Lipo 5S max)
- Maximum current: 24 amps
- Dimensions: 35 * 35 * 14 mm
- Weight: 21 grams
- Internal RDSon resistor: 7 mOhm
- Battery and motor connection: silicone 1.0 mm² (without connectors)
- Switching frequency: 1.5 Khz
B and R connection: (B = brake, R = recoil)
If the control stick is moved forwards or backwards, the brake light goes out. In neutral, the brake light is on for 8 seconds. The reverse light comes on when reversing.
The two negative-switching outputs each deliver a maximum of 3 amperes (2A continuous). Connect the "minus" LEDs to outputs B and R (also install one resistor per LED in the circuit). Connect the plus side of the leds to the battery's plus side.
The neutral point is set at a pulse width of 1.5 ms, and therefore corresponds exactly to today's conventional RC systems. No special settings are required to operate this ESC.