Functional anchor winch kit for 2 anchors

Functional anchor winch kit for 2 anchors

Krick 65312

Kit to mount a functional anchor winch, for 2 anchors.

Plastic parts, CNC machined, to assemble, servomotor control provided.

Operation of the electric anchor winch with one or two chain drums:

This electric anchor winch makes it possible to let one or two anchors of a boat model descend freely, and then to reassemble them slowly. The control of the integrated servo is done by a proportional channel or a switch 3 position. In the neutral position, the anchor is held in position, in one direction the anchor will be raised and in the other direction the gear motor will be disengaged. The anchor will thus fall by its own weight. A clutch ensures that there is no damage if the anchor locks, or is completely reassembled, in case the engine is not disconnected. The winch will be mounted invisibly under the bridge of the model. The mechanism, as well as the training acts on both chains in the version with two drums.

Notice in French to download see "téléchargrment" on this page.

Specifications:

• Total width 60 mm
• Length 130 mm
• Height 60 mm
• Weight approx.: 140 g
• Operating voltage 6V

Comes with servomotor

Necessary accessories (not provided):

• Anchor (metal)
• Anchor chain
• 2-pole connector for current supply