Servonaut T24 ESC for Truck Trial and Rock Crawling

Introduction

The Servonaut T24 ESC is specially designed for off-road and trial riding. The electromagnetic brake is reinforced. The high operating frequency prevents interference and ensures great flexibility. Two outputs are available to power brake lights and headlights.
A powerful BEC (4A) powers the radio remote control. Consumption, battery voltage, temperature of ESC and reception quality are constantly monitored.
If the model exceeds tolerable values, it is automatically stopped and braked.

Other features:

• Smooth start-up.
• Maintained braking: the model does not accelerate downhill.
• During electromagnetic braking, the battery is recharged.
• Acceleration and braking power can be set in several levels (with Servonaut CARD).
• Additional brake control for hard braking and low speeds.
• Controlled traction system for climbing over obstacles.
• Short interference suppression.
• Can be used with sound modules Servonaut (SMX / SM3 / SM7)
• Output for brake and tail lights (or brake and reverse lights via Servonaut CARD)
• Several additional settings available via Servonaut CARD (available separately, see "accessories")
  • Common ignition settings for pilot and brake lights
  • Bulb lighting effect
  • Acceleration speed
  • Braking speed
  • Speed limitation by brake
  • Mode (current cut-off)
  • Reversing beep on/off (only with sound modules Servonaut)
  • Back-up lights on/off
  • Motor rotation direction

Supplied with French instructions by Tecnimodel.

Features:

• Power supply: 7.2v or 12v Nimh, 7.4v or 11.1v (Lipo 2S or 3S)
• Max. current: 20A for 5 min / 30A for 30s.
• Switching frequency: 16 Khz
• BEC power supply: 5.3v, max 4A
• Protection: temperature, low voltage, overload, current peak
• Max. reverse speed: 100%
• Light outputs: 2 x 700mA, 1 brake light output, 1 adjustable standby/reverse output.
• Number of channels required: 2 (motor and brake control)
• Receiver connection type: UNI type (JR/Graupner)
• Dimensions: approx 70x36x8mm