FLYSKY FTr4 AFHDS3 receiver
Small receiver suitable for modules requiring a limited number of channels. Suitable for FLYSKY radios with AFHDS3 protocol (e.g. Paladin radios).
Reference : RAFLFTR4
100% Secure CB Payment
100% secure CB payment. Payments in 2x, 3x or 4x.
Fast deliveries
Shipment within 24 hours (in working days)
AH01
FLYSKY FTr4 4-channel AFHDS3 receiver
Small receiver suitable for modules requiring a limited number of channels. Suitable for FLYSKY radios with AFHDS3 protocol (e.g. Paladin radios).
Specifications
- Product model : FTr4
- PWM channel : 4
- Wireless frequency: 2.4GHz
- Wireless protocol: AFHDS3
- Range: > 1500m (air)
- Antenna type: Single antenna (50mm)
- Power supply: 3.5v - 8.4v
- RSSI: supported
- Data port : PWM / PPM / i.bus / s.bus
- Temperature range: -10 ℃ - + 60 ℃
- Humidity range: 20 % - 95
- Online update: Yes
- Dimensions : 33.7*20*10.7mm
- Weight : 4.9g
- Certification: CE，FCC ID: N4ZFGR4P00
Pairing procedure:
- Insert the link cable into the "BIND" port on the receiver.
- Plug the power cable into any other port. The receiver's LED starts flashing rapidly, indicating that it has switched to bind mode.
- Switch the transmitter to bind mode (see transmitter instruction manual for details).
- The connection is successful when the receiver LED stops flashing. Remove the power and bind cables from the receiver.
- Reconnect the power cable to the receiver.
- Check that the transmitter and receiver work as expected; if there are any problems or unexpected operation, follow the steps above to reconnect.
