Brushless motorization kit for RIVA AQUARAMA 1970 AMATI

Brushless motorization kit for RIVA AQUARAMA 1970 AMATI

Krick 25036

Complementary drive kit for the AMATI RIVA AQUARAMA 1970.

With this motorization, the model achieves a fast, true-to-life speed with a 3S LiPo battery.

The two brushless motors have sufficient torque to drive the propellers directly. This significantly reduces noise levels and increases efficiency.

The counter-rotating propellers compensate for the torque generated by the motors, ensuring a smooth clockwise-line trajectory.

Propulsion kit contents :

• 2 MAX Marine P-358 910kv electric motors
• 2 SEAKING 30A electronic speed controllers
• 2 couplings
• 2 stern tubes Ø6mm length 210mm with M4 propeller shafts length 260mm
• 2 Ø35mm M4 three-blade propellers (one right and one left)
• 2 rudders with spreaders
• Small parts and installation instructions

We strongly recommend using a minimum 3000mAh LiPo 3S (11.1V) drive battery.

Requires soldering work for the power supply to the 2 brushless controllers and a Y servo lead to connect the 2 brushless controllers to the receiver.

Both controllers can be water-cooled (not necessary for this assembly). Silicone hose and water inlet/outlet are available as accessories, under part numbers ACKR70917 and PBRA10001.