Servonaut light module with integrated infrared transmitter

SERVONAUT LA10

Radio controlled truck light module, configurable and with integrated infrared emission function to wirelessly control the functions of a trailer.

With these features, the LA10 replaces 3 modules Servonaut: the ML4, the MM4 and the AIR-U, hence a simplified integration and the possibility of more advanced adjustments.

Warning: the installation of LEDs involves the use of resistors!

Characteristics:

• Operating voltage: 4.8V to 18V
• Dimensions: 53 x 32 x 19mm
• Output current: 10 x 700mA, protected against short circuits
• Connection to the battery by BEC socket.

Features

• Duties:
  • Flashing
  • hazard warning lights
  • Pilot lights
  • dipped-beam headlamps
  • front fog lamps
  • Rear fog lamps
  • main-beam headlamps
  • cornering lights.
  • Additional exit 1, choose between a universal exit, a parking/flash combination or a daytime running light.
  • Additional output 2, choose between a universal output or separate front fog lamps
• Integrated infrared control for trailer lights (Infrared LED to be acquired separately see "accessories" on this page.)
• Many programmable functions with a CARD programming board Servonaut (to be acquired separately see "accessories" on this page.) or radio controller Servonaut HS12
• Controllable with two or three channels or a "Multichannel" system
• Compatible with Robbe Multiswitch, Expert Graupner Nautic, MultiBus Servonaut
• 10 switching outputs
• 2 inputs servo directly transmitted by Infrared to the trailer to control functions such as crutches or lifting motors.
• 2 diagnostic LEDs

Available settings (by the Servonaut CARD available separately):

• Functions of Extra 1 and Extra 2 outputs
• Combined or non-combined rear lamps (combined or not stop lamps and night light)
• Adjustable bulb lights effect
• Adjustable brightness
• US rear lights
• Activation of cornering lights
• Hazard warning lamps which can be activated automatically in reverse
• Turn signals are configurable manually, by management or with a delay
• Mode Xenon

Contents of the box:

• Light source module LA10
• 3 receiver connection cords (depending on the installation method chosen, up to 3 additional cords may be required (see "accessories")
• Card printed for insertion into Servonaut CARD (Servonaut CARD not provided)
• Notice in French made by TECNIMODEL

Optional equipment available separately (see "accessories"):

• Carte de réglage Servonaut CARD
• AIR-DIODE/N infrared emission led
• AMO Servonaut infrared receiver for trailer
• Additional link cords with the receiver